Coating evaluation Cell-5/50ml

Description

The coating evaluation cell enables localised electrochemical testing on coated or bare metal sheets by sealing a defined circular area and creating a stable electrolyte reservoir over the surface. Available in 5 mL and 50 mL formats, it is ideal for rapid paint/film assessments, scribe studies, and inhibitor screening using polarisation or EIS.

A rigid body with chemical-resistant seals ensures consistent contact pressure and leak-free measurements, while ports accommodate a reference electrode and an inert counter electrode. This geometry lets you evaluate multiple sites on the same panel under repeatable conditions, saving materials and time. Typical test-spot diameters for similar fixtures are around 40–45 mm with thickness allowances of a few millimetres; select the insert that matches your panel thickness and surface finish. The cell interfaces readily with standard lab potentiostats and electrodes for corrosion work.

For further information or to discuss your specific research requirements, please contact us.