Privacy policy

Terms of Use

Home

About Us

Publications

Contact Us

Blog

Products

Resources

Catalogue

High-performance EIS battery cyclers for accurate impedance and cycling tests. Ideal for battery labs in AU & NZ.

EIS Battery Cycler Series | Impedance & Charge Testing AU & NZ

Squidstsat Cycler Key Features &amp; Benefits:
<ul>
<li>24-bit Analog-to-Digital Converter (ADC) for 0.06 ppm voltage measurement resolution</li>
<li>Every channel is equipped with Electrochemical Impedance Spectroscopy (EIS) up to 10 kHz</li>
<li>Every channel can run 2, 3, or 4-electrode measurements, with temperature sensor built in</li>
<li>Customizable up to a 0-60V voltage scan range and +/-60A maximum current range per channel</li>
<li>Available in a handheld 4-channel configuration, or rack-mounted for higher channel counts</li>
<li>Any number of channels can be stacked together in parallel to go as high as 1000A</li>
<li>Operated by our modern Squidstat User Interface with drag-and-drop experiment builder options</li>
</ul>
Supported Measurement Techniques:
<ul>
<li>Battery Capacity</li>
<li>Charge / Discharge (Constant C / Constant V)</li>
<li>Charge / Discharge (Constant R / Constant P)</li>
<li>Chronoamperometry</li>
<li>Chronopotentiometry</li>
<li>Cyclic Voltammetry (CV)</li>
<li>Electrochemical Impedance Spectroscopy (both PEIS and GEIS)</li>
<li>Galvanostatic Intermittent Titration Technique (GITT)</li>
<li>Linear Sweep Voltammetry (LSV)</li>
<li>Mott&ndash;Schottky (single-frequency and multi-frequency)</li>
<li>Open Circuit Potential Monitoring</li>
<li>Potentiostatic Intermittent Titration Technique (PITT)</li>
<li>Square Wave Voltammetry</li>
<li>Staircase Voltammetry</li>
</ul>

Reliable SquidStat base model for EIS cycling and electrochemical measurements. Ideal for AU & NZ labs and researchers.

SquidStat EIS Cycler Base Model | Electrochemical Testing 


Potentiostatic Intermittent Titration Technique (PITT)


Mott–Schottky (single-frequency and multi-frequency)


Galvanostatic Intermittent Titration Technique (GITT)


Electrochemical Impedance Spectroscopy (both PEIS and GEIS)


Charge / Discharge (Constant R / Constant P)


Charge / Discharge (Constant C / Constant V)

Squidstat EIS Cycler Base Model

Squidstat Cycler Customization Options:
<ul>
<li>Customizable up to a 0-60V voltage scan range and +/-60A maximum current range per channel</li>
<li>Up to 3 kW max input/output on individual channels</li>
<li>Channels can be combined up to 1000A at up to 60V with 120kW max combined power</li>
<li>Multichannel 19&Prime; rack-mount configurations to support 10s, 100s, or 1000s of channels</li>
<li>Configure channels to run in 4-quadrant bipolar mode, just like a standard potentiostat</li>
<li>Bidirectional power supply configurations available to conserve power and lower operating cost</li>
<li>Application Programming Interface (API) available for integration &amp; automation with other systems</li>
</ul>

Customise your SquidStat EIS cycler with modules and options for specific research needs across AU & NZ labs.

SquidStat EIS Cycler Customisation | Tailored Solutions

Squidstat EIS Cycler Customisation Options

Electrochemistry

Spectroscopy

Energy Test Stations

Bio & Life Science Research

Electrochemistry Accessories

Faraday Cage

Other Electrochemistry Accessories

Online Raman

Online Raman Analyzer for Liquids

LIBS

LB1000S Handheld LIBS Element Analyzer

Potentiostats / Galvanostats

Multi-Function RRDE system

Bipotentiostats & RRDE Systems

Platinum Electrode Clamp / Holder

Electrode Clamp/Holder

Spectroelectrochemistry

Spectroelectrochemistry Raman

Disposable Electrochemical Sensors

Gii-Sens - Pure 3D Porous Graphene Sensing Strip Electrode (SSE)

3D Porous Graphene Sensing Strip Electrode

Turnkey MEA Complete Package — All Components Included

Membrane Electrode Assembly (MEA) Test Cells

Single Electrodes (S1PE)

Thick Film Screen-Printed Electrodes

Semi Battery Test Cell

Battery Test Cell options

Mediated Single Electrodes (S1PE)

Interchangeable channel Membrane Electrode Electrolytic Cell

Dual Electrodes (D2PE)

Graphite Rod Counter Electrode

Counter Electrodes

NEWARE Battery Cycler

CT-6000 Pack Testing System

NEWARE CE-6000 Series

Single Electrodes (SE)

Thin-Film Microfabricated Electrodes

Flat corrosion Cell

Corrosion Test Electrochemical cell

Coating evaluation Cell

CT-6000 Cell Testing System

Handheld Raman spectrometers

RS1500 Handheld Raman - 1064 nm

General Applications

RS1000 Handheld Raman - 785 nm

Zinc Air Battery Test Cell

Platinum Wire Electrode

EIS Battery Cycler Series

Visual Membrane Electrode Electrolytic cell

CS2150M Bipotentiostat (2-channel, No EIS)

CS2350M Bipotentiostat (2-channel, with EIS)

CT-6000 Module Testing System

CE-5000 Laptop Battery Testing System

NEWARE CT/CTE-5000 Series

20A/40A/100A Current Booster

Current Boosters

Solid State Battery Test Cell

5-Port Corrosion Cell

Platinum Plate Electrode

Online FT-IR

Online FT-IR Analyzer

CTE-5016 5V75A DSP

Graphite Electrode Clamp

Electrode Polishing Kit

Battery Test Cell

10A/50V Power Booster CS5010B

Zinc-Air Battery Test Cell – PTFE

Nafion 115 Proton Exchange Membrane

Ion-Exchange Membranes

Nafion 117 Proton Exchange Membrane

Metal Bipolar-plate Membrane electrode Electrolytic cell

Nafion 211 Proton Exchange Membrane

Platinum Gauze Electrode

Nafion 212 Proton Exchange Membrane

NC700 Ultrafine Proton Exchange Membrane

CT-5000 5V6A & 5V12A (3 ranges)

Fumasep Anion Exchange Membranes (AEM) – FAA-3 & FAB Series

Fumasep Cation Exchange Membranes – FKS & FKB Series

Bipolar-plate Membrane electrode Electrolytic cell

Fumasep FBM-PK Bipolar Membrane

Platinum Mesh Electrode

Microelectrode Array (MEA)

Interdigitated Electrodes (IDE)

Interdigitated Microelectrode Array (IDA)

Interdigitated Ring Array (IDRA)

Glassy Carbon Electrode Clamp

Corrosion Speciman Holder

Jacketed Flat Corrosion Cell

Platinum Helix Wire Electrode

Gold Electrode Clamp

Membrane electrolysis cell stack electrochemical cell

Stainless Steel Electrode Clamp

Squidstat Prime

Multichannel

Battery Cycler Accessories

Alligator Clamp

Photoelectrochemical Cell – Unsealed Type

Photoelectrochemical Cells

Photoelectrochemistry & Photovoltaics

CIMPS 

Disc Electrodes

Working Electrode

Glassy Carbon Rotating Disk Electrode (GC RDE)

RDE/RRDE Electrodes

RS1000DI Pharma Analyser - 785 nm

Pharma

Battery Environmental Test Chambers

Coin Cell All-in-one Testing System

Microfluidic accessories

SPE Connectors

Squidstat Solo

Single Channel

ECSens BIPOT Electrochemical Sensing Interface

Portable

Electrochemical and Microfluidic Platforms

Device Accessories

Zennium PRO

Modular

Glass Electrochemical Cell, unsealed

Electrochemical Cell

Lab Raman

Raman microscope

PAD4 Cards

Specialised Devices and Modules

Spectroelectrochemical Cell

In-Situ & Operando Electrochemical Cells

Ag/AgCl Reference Electrode

Reference Electrodes

H-type Membrane Cell, unsealed

H-Cell

CT-4000 – 5/10V 50mA (3 ranges)

NEWARE CT-4000 Series

CT/CTE-8000 Simulation Battery Testing System

NEWARE CT/CTE-8000 & 9000 Series Battery Simulation Testers

Silver Wire Pseudo Reference Electrode

RS1500DI Pharma Analyser - 1064 nm

CIMPS-QE/IPCE

Photoelectrochemical Cell – Sealed Type

Multichannel (4-Ch, 1-EIS)

CT-9000 Ultra-Precision Battery Testing System

CT-4000 5V100mA (4 ranges)

Thin-Film Connectors

ECStat Electrochemical Station ECSTAT2020

Drop-cell Connector

Mini-All-in-one Testing System

Squidstat Plus

Sealed H-Cell

L-Type Working Electrodes

Portable potentiostat for field-based electrochemical testing in batteries and sensors

Pure 3D Porous Graphene Strip Electrode – Gii-Sens by ScienceGears

Working electrode types: glassy carbon, platinum, gold

High-Precision Single-Channel Potentiostat for Electrochemistry

MicruX Thick-Film SPE on ceramic Substrate – ScienceGears

Reference Electrodes — ScienceGears

Gold and Platinum Thin-Film Microelectrode for EIS and Lab-on-Chip – ScienceGears

ScienceGears counter electrodes – platinum & graphite

Bipotentiostat with EIS for RRDE, Electrocatalysis, and Fuel Cell Research

Advanced multichannel potentiostat system for parallel electrochemical testing

Dual-Chamber H-Cell for Membrane-Separated Electrochemical Studies

Zennium FRA-enabled modular potentiostat for battery and fuel cell testing

ScienceGears MEA Test Cell for PEM/AEM

ScienceGears ion-exchange membranes – Nafion & Fumasep – AU & NZ

Jacketed multi-port corrosion test cell for electrochemistry

High-power current booster add-on for Zahner potentiostats

Specialised electrochemical modules for battery, corrosion, fuel cell, electrocatalysis and sensor testing

Product Groups

Product Category

Products

Application Notes

Publications

Software

Installation Videos

Support

EIS Battery Cycler Series

Squidstat EIS Cycler Base Model

Squidstat EIS Cycler Customisation Options

We Value Your Privacy